EDILPOL 3 & 4mm
EDILPOL is a plastomeric modified bitumen waterproofing membrane (APP), industrially manufactured by impregnation of the reinforcement with the waterproofing compound based on distilled bitumen modified with polyolefin polymers, which gives to the compound excellent technical characteristics.
Need more information?
DESCRIPTION
EDILPOL is a plastomeric modified bitumen waterproofing membrane (APP), industrially manufactured by impregnation of the reinforcement with the waterproofing compound based on distilled bitumen modified with polyolefin polymers, which gives to the compound excellent technical characteristics.
The composite reinforcement, made of nonwoven polyester in combination with fiberglass, conveys good mechanical characteristics, excellent dimensional stability and elastic performance.
Shaping of sheets, straightness, dimensional and surface uniformity are accomplished by hot calendaring of the mass at hot melt fluid state.
The upper surface is coated with anti-adhesive amorphous sand. The lower surface is coated with a thermo-fusible polyolefin film
FIELD OF APPLICATION
EDILPOL is suitable as underlayer or as intermediate layer in multi-layer waterproofing systems, with compatible membranes.
General roofing, on or under floors, wall constructions, are valid examples of the design application of this product. It is not suitable for roof gardens.
It can be applied onto every substrate, and it is suitable for any climate conditions and all the situations where a barrier against water is required.
METHOD OF INSTALLATION
The excellent thermoplastic properties of the waterproofing compound allow the application with torch- on system or hot air generator. In particular situations, it could be applied with appropriate sealants or mechanical fastenings.
The application of the membrane must be carried in good weather conditions and after the substrate has been adequately cleaned and prepared.
PACKING AND STORAGE
The product is packed as standing rolls on wooden pallets wrapped with thermos-shrinking protective hoods. Rolls must be stored in the upright position, without stacking the pallets to avoid deformations which can compromise the correct application of the membrane. The product must be stored indoor, protected from heat and frost.
INTENDED USE OR USES
Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing.
Flexible sheets for waterproofing. Bitumen damp proof sheets including bitumen basement tanking sheets